| Standard Repair Number: | SR-BJ-00001 |
| Applicability: | Models MU300, 400 and 400A |
| Title: | Standard Repair – Inspection Holes in Inner
Skin Assembly, Middle Fuselage, Top Beam at W.L. -410.00 (-16.14)
|
| Revision / Issued Date: | A / MAY 03 2002 |
|
| Standard Repair Number: | SR-BJ-00002 |
| Applicability: | Models MU300, 400 and 400A |
| Title: | Standard Repair – Engine Air Inlet Duct Stiffener Repair |
| Revision / Issued Date: | 3 / FEB 03 2009 |
|
| Standard Repair Number: | SR-BJ-00015 |
| Applicability: | Models MU300, 400 and 400A |
| Title: | Standard Repair – Chafing, Aft Nose Gear Door on Fuselage |
| Revision / Issued Date: | A / JUN 17 2004 |
|
| Standard Repair Number: | SR-BJ-00017 |
| Applicability: | Model 400A |
| Title: | Standard Repair – Chafing, Stiffener - Upper Web, NLG Bay and Compressor Fan Cover |
| Revision / Issued Date: | - / MAY 13 2004 |
|
| Standard Repair Number: | SR-BJ-00020 |
| Applicability: | Models 400 and 400A |
| Title: | Standard Repair – Corrosion, Horizontal Stabilizer, LH and RH Leading Edge Skins |
| Revision / Issued Date: | 1 / MAY 31 2006 |
|
| Standard Repair Number: | SR-BJ-00021 |
| Applicability: | Models MU300, 400, 400A and 400T |
| Title: | Standard Repair – Wear Impressions on Wing Flap Rails at Lower Roller Contact Surface, P/N 45A10423, 45A10424, 45A10425 |
| Revision / Issued Date: | 1 / MAR 13 2006 |
|
| Standard Repair Number: | SR-BJ-00022 |
| Applicability: | Models 400 and 400T |
| Title: | Standard Repair – Rework of Main Gear Axle, Inner Bearing Land P/N 128-810037-1/-2/-3/-4 |
| Revision / Issued Date: | 1 / MAR 27 2006 |
|
| Standard Repair Number: | SR-BJ-00024 |
| Applicability: | Models MU300, 400, 400T and 400A |
| Title: | Standard Repair – Missing Drain Holes In LH and RH Wing Lower Inboard Stringers Near WS 50.6 |
| Revision / Issued Date: | 1 / FEB 28 2007 |
|
| Standard Repair Number: | SR-BJ-00025 |
| Applicability: | Models 400 and 400A |
| Title: | Standard Repair – Deteriorated Seals, Wing, Lower Skin |
| Revision / Issued Date: | 1 / APR 24 2007 |
|
| Standard Repair Number: | SR-BJ-00027 |
| Applicability: | Models 400 and 400A |
| Title: | Standard Repair – Sheared Rivets - Horizontal Stabilizer, Lower Skin, Just Forward of Pivot Fitting |
| Revision / Issued Date: | 1 / JAN 07 2008 |
|
| Standard Repair Number: | SR-BJ-00028 |
| Applicability: | Model 400A |
| Title: | Standard Repair – Unnecessary Pilot Holes, LH and RH Horizontal Stabilizer, Leading Edge Skins (P/N 128-380078-9 and 128-380078-10) |
| Revision / Issued Date: | 1 / MAR 14 2008 |
|